Re: Need help with drawings in Creo 2
The templates depend on coordinating pre-defined views of particular names with matching names in models in order to place and orient the views. I'm not sure what happens if there is no match. After...
View ArticleClik here to view.
Re: Need help with drawings in Creo 2
You would think a replace similar to assembly component replacements could be implemented fairly easily in drawings. Maybe PTC just forgot that the current functionality is somewhat archaic
View ArticleRe: Need help with drawings in Creo 2
It's a slippery ugly slope.Should all the components get balloons that match the function the parts provide, all the dimensions be layed out the same as they were? If a view has sections with it that...
View ArticleRe: Need help with drawings in Creo 2
Oh yes... I can see the slope is pretty steep! However, my use case is quite common and even if all the dimensions unassociated or disappeared, I would be happy if only the drawing "setup" remained for...
View ArticleRe: Need help with drawings in Creo 2
I've also wanted a flatter modeling system for a long time, where parts and assemblies weren't different, for just the same reason. Plus, it would make adding material to assemblies easier. Real solid...
View ArticleRe: Need help with drawings in Creo 2
True; in many instances I detail the part and add the inseparable press-in feature in a separate view with a different model in the drawing. I don't use a PDM and therefore don't have to account for...
View ArticleRe: Need help with drawings in Creo 2
Hmm, not tested but the only solution I can think of would propably be to add (import) the sticker or nut or whatever as another component to part level, and then for BOM just use dummy empty part that...
View ArticleRe: Creo Parametric 3.0 - Assembly Explode Lines
Yes, this is part of the edit explode feature (edit position).
View ArticleClik here to view.
Re: Creo Parametric 3.0 - Assembly Explode Lines
Okay. I see it now, as I have shown in the below image. Thanks.
View ArticleClik here to view.
Clik here to view.
Re: Need help with drawings in Creo 2
Making hardware for sheetmetal part in part mode is not an option. I do provide STEP files to suppliers and I do want the supplier to be able to remove the hardware for their process. There really is...
View ArticleClik here to view.
how make graph reaction (force or moment)
Helloanyone can give me example of graph reaction i donot know what must curve choose
View ArticleCreo Schematics 2.0 Drawing Units
Hello all, I need someone, anyone, to point out where to change drawing units from inches to millimeters. It looks like the default should be in 'mm' but every integer has been converted into imperical...
View Articlehelp my maximum license
hello, i am a student who use creo in south korea.i failed many time to install because my student license makes problem always.at last, i try to re-install creo.but, my install process gives me a...
View ArticleHow to plot c(t) vs t with these parameters for various values of v
How to plot c(t) vs t with these parameters for various values of vc(t)=c0-c03*k*(1/cmin-1/cmax)*v*u(t) where, u(t)=1, t≥0 0, t<0 Cmin=10e-9 Cmax=10e-6 C0=100e-9 K=10e6Thanks in advance
View ArticleRe: How to plot c(t) vs t with these parameters for various values of v
Vetri; exactly what are you trying to accomplish?
View ArticleClik here to view.
Clik here to view.
Re: Symbol Orientation 3D vs 2D
I am getting some strange results, but the model generated annotation is maintaining the original symbol definition when shown in the drawing in Creo 2.0 M040. I can make it an annotation feature or...
View ArticleClik here to view.
Re: Symbol Orientation 3D vs 2D
I edited the symbol in the model with different fonts (the odd one out is the default). The rotation was not maintained but the font definition was. Once I told the symbol to allow text rotation, it...
View ArticleClik here to view.
Re: Symbol Orientation 3D vs 2D
And after saving the part and erasing memeory, it comes up with default fonts again
View Article