Clik here to view.
Re: Open CATIA File in Creo?
Steven, in case of CATIA V4 model you will need "Interface for CATIA II with ATB". Ask Google for "About Interface for CATIA II with ATB". See also...
View ArticleClik here to view.
Re: Open CATIA File in Creo?
Not at all, Creo 3.0 will open both parts and assemblies (without features history, of course) and allow to work with it. So far it's being show in assembly context to show how users can now insert...
View ArticleRe: Open CATIA File in Creo?
Lukasz, I do not believe that every Creo Parametric 3.0 commercial license (eg. PROE_FoundationAdv) enable user to open CATIA files. I have never seen information that PTC is going to provide Creo...
View ArticleClik here to view.
Positions on assembly drawing via repeat region
Hello, I would need to help with a repeat region to describe positions on the drawing below.I just dont know which repeat region shall I use. On the second pic I use mbr/name but i would like to link...
View ArticleClik here to view.
Re: Open CATIA File in Creo?
MartinHanak wrote: Lukasz, thanks for sending links. I watched the video and heard words "it's for free". To be sure that I understand it well, I'll wait until PTC releases PTC Creo 3.0. Then I'll...
View ArticleRe: Open CATIA File in Creo?
http://creo.ptc.com/2014/07/14/unlock-the-value-of-legacy-data/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+ptccreo+%28PTC+Creo%29 I'll fast forward it abit, and say that with...
View ArticleRe: Open CATIA File in Creo?
Thanks. This is good to know, and it's the correct answer.
View ArticleClik here to view.
pattern using rotate and distance
I must be getting tired. How do I get this pattern to work?The 1st element is rotation, and the second is a linear translation at the rotated position. Seems elemental, but I cannot seem to figure out...
View ArticleClik here to view.
Counting the numbers of perimeters
Good Afternoon! I need to know the numbers of perimeters of plates, because I use the value to calculate the LASER machine timing. The image below shows an example. As you can see, the red area is 1...
View ArticleClik here to view.
Re: pattern using rotate and distance
I got it to work. Seems relation driven dimensions cannot be used the Direction 1, or certain other types of dimensions. It just ignores the entry rather than providing a warning! Bad form This is...
View ArticleRe: Counting the numbers of perimeters
If you create a plot file using HPGL output -and- the output is decent, you will be able to count the PU PD commands. There should be two places the pen sets down PD, and two places the pen is lifted...
View ArticleRe: pattern using rotate and distance
cool! but, more time consuming?Or is there detail there you aren't showing us?
View ArticleClik here to view.
Re: pattern using rotate and distance
Matt, this is only a simplistic model of what I am trying to do. In the mnore complex version, I am running into all kinds of limitations including wrong origins and not being able to correct for them...
View ArticleRe: Counting the numbers of perimeters
Hello, ---Procedure no.1---Analysis > Measure > hold CTRL and select all edges (one by one) and you will get requested value. ---Procedure no.2---create a copy of model face, which contains your...
View ArticleRe: How to set up line thickness for drawings?
I noticed that this file is written to disk when you open the dialog for the export option. Use F4 to show the allowable commands. Of course, it is dangerous to leave these files lying about on the...
View ArticleRe: Moving notes with Exploded View
Three things nail this down: 1) Set the view origin to something in the model that cannot change - such as an initial Coordinate system that precedes all other geometry. 2) Make the view a partial...
View ArticleRe: Moving notes with Exploded View
Nice one David!! Actually, 1 and 2 did not work for me. #3 however, was the winner!I played with the snap lines a little before posing the question and somehow overlooked the boundary vs. geometry...
View ArticleOpening Creo 1.0 (student version) files in Creo 1.0 full version
I am creating part files in creo 1.0 student version and was wondering if the files could be opened in the full version programs too?Does any one have experience in opening files across the two...
View Article