Re: Learning Connector issues (?)
Hi Frank, I am sorry you have had difficulty trying to resolve this issue. Getting Learning Connector up and running shouldn't be difficult. You probably know this already, but when you contact PTC's...
View ArticleRe: automatic constraints in sketch
Robbie,Have you tried going into File; Configuration Editor; Sketcher? The sketcher constraints can be turned on and off there.
View ArticleRe: Enhancement Requests for Creo - Now's the time to speak up!
COMPLEX LOGO IMPORT Hopefully, it's not too late to add more. I'd like to see a better way to emboss complex logos. The methods we've tried imports the logo with thousands of dimensions (i.e. sketcher,...
View ArticleRe: Enhancement Requests for Creo - Now's the time to speak up!
Until then, you can read them into a datum curve from file using IGS (IGES) format files. Since logos often come in from dwg or dxf, it takes a stop off at a drawing, from which you can make the IGES...
View ArticleRe: mapkey trouble in Creo 2.0
Rob, what you want is not doable just with Creo mapkeys. To fake this old functionality, which is now gone, I'd make at least two scripts in Autohotkey, and then mapkeys to run these scripts. I'll...
View ArticleRe: Sketched spline
It is obvious we need a little more control of splines in sketches. Anyone with maintenance... please vote for this: Node Control of Spline in sketch
View ArticleRe: Sketched spline
I think I figured out the logic, Doug. The control points remain "along the spline" by their ratio when placed before activating the control polygon. Therefore, since I had a perfectly linear spline...
View ArticleRe: Sketched spline
Yes, but my original sketch had a 45 degree dimension to angle the spline at that point, which should have been redundant. Anything other than 45 degrees would have made it not vertically and...
View ArticleRe: Sketched spline
Antonius, So you started the intial sketch of the spline by picking 3 points instead the way I did by picking 5 points?I redrew it that way and you can constrain/dimension into shape and it looks like...
View ArticleClik here to view.
Re: Sketched spline
There is obviously a difference. Sketch one is 3 points and sketch two is 2 points. The 45 degree is variable in both and does change the shape. I know there are proper terms for controlling...
View ArticleClik here to view.
Re: Sketched spline
PTC Creo | Intuitive = Polar Opposites... Infinity! Matt, Doug actually helped me uncover the "logic" of the spline's nodes. This is very good to know and quite controllable -before- using the...
View ArticleClik here to view.
Re: Sketched spline
I used the same technique with 5 points. Created a linear spline and made the distances equal between nodes. then activated the control polygon and manipulated the polygon to come up with the same...
View ArticleClik here to view.
Re: Fatal Error - Traceback log
Thanks for the responses. I have sent them files that I thought were corrupt, but they couldn't reproduce the crash. ptc-408694 - that's and interesting thought. I do have Creo 2.0 (M030) as well as...
View ArticleRe: mapkey trouble in Creo 2.0
The way Creo works now I doubt you can do this with mapkeys. Maybe the best option here is a external script: Autohotkey or Autoit (they are similar).These programs send a series of programmed...
View ArticleRe: Use trail files for batch conversion
Look at the config optio "file_open_default_folder". I beleive the default is "my_documents", you want it set to "working_directory".
View ArticleRe: mapkey trouble in Creo 2.0
Ok, Step by step tutorial: 1 - Put the following lines in the end of your Config.pro and save: mapkey )) @MAPKEY_LABELReference_Dim;\mapkey(continued) @SYSTEMStart...
View ArticleClik here to view.
Clik here to view.
Re: Format Size
There are several ways. You should have been given the option when you created the drawing. But since you alread have the drawing started, the easiest way is to be on the "Layout" tab, and right...
View ArticleRe: Format Size
You can double click on the size right there and change it or you can right click on the sheet tab and select SETUP or the LAYOUT TAB, select SHEET SETUP.
View Article