Re: Sheetmetal Corner Relief - Circular - Creo Parametric 2.0 M070
Bryant, The image that I provided is a corner, but are you saying a different type of corner?
View ArticleRe: Sheetmetal Corner Relief - Circular - Creo Parametric 2.0 M070
Yeah, a corner on a flange wall like in this attachement:
View ArticleProblem bei der Installation
Hallo Leute, ich habe ein Problem mit der Lizenzierung von Creo2.0. Ich gebe die "einfache Lizenz " ein und es kommt eine Fehlermeldung mit "es fehlen Pflichtangaben" , obwohl ich alle benötigten Daten...
View ArticleClik here to view.
Re: Sheetmetal Corner Relief - Circular - Creo Parametric 2.0 M070
The corner relief created.
View ArticleRe: Sheetmetal Corner Relief - Circular - Creo Parametric 2.0 M070
Bryant, Thanks for the tip.
View ArticleClik here to view.
Re: how to open creo 2.0 file in wildfire 4.0?
Doug, In GCRI link, there are some notes at the bottom of the page, and one of the notes states: "GCRI support is limited to the previous two releases, except in Wildfire 3.0 which is limited to the...
View ArticleRe: how to open creo 2.0 file in wildfire 4.0?
They are only "supporting" or guaranteeing it can be opened in the previous 2 releases. It may work on older releases. I haven't personally tried it but this is my interpretation of the statement. I...
View ArticleRe: Creo 2.0 Update to M080 - objects will not save. Cache compatibilty issues
What specific "cache" are we talking about. Without Windchill, do I even have a cache location?
View ArticleRe: Problem bei der Installation
HalloSafaundWillkommenimForum. Ichbin mirnichtsicherwaseineeinfacheLizenzist. JedochkönnenSiedrag&dropdiestandardLizenzdenInstaller. (übersetztmitBING)
View ArticleRe: Creo 2.0 Update to M080 - objects will not save. Cache compatibilty issues
Its the workspace cache while connected to a PDMLink session. it shouldnt affect anything in a standalone session of Creo.
View ArticleRe: Creo 2.0 Update to M080 - objects will not save. Cache compatibilty issues
Thanks for the clarification, Andrew.
View ArticleRe: Assy. Notes with Auto. Generated Component Name (Creo 2.0)
What do the :att or :att_mdl extensions do?
View ArticleHow to export boundary box dimensions in Modelcheck?
Hey all - this is my first post on this board. I come here with the hopes of gaining some knowledge! I have a rather large assembly and I am looking to export the boundary box dimensions of each...
View ArticleRe: How to get current model name when I create a Drawing?
I´ve done a small script for that too. It´s made with Autoit and it´s for Creo 2.0: https://www.dropbox.com/s/iri3b7bbiuj3rqh/new_drw.zip All you have to do is execute it with Creo open or create a...
View ArticleRe: Combined View for drawing
Did you use SimpReps or layers to define the combined states?If you use layers and 'include layer status' when saving the defined views, what you describe should work.
View ArticleClik here to view.
Re: Combined View for drawing
Actually I am following the below steps1) Created the new part as below2) Created the layer states “A” showing Surfacesand “B” in which surface will be hidden as below3) Now we have...
View ArticleGrabCAD Workbench with Creo?
Anyone using GrabCAD Workbench with multiple people with Creo? Observations? Cheers, Sean
View ArticleClik here to view.
threaded hole in drawing
Hello, Is there some way how to automatically show the M8 thread without small diam (d7) so that it does not have to be deleted ? Thnx
View ArticleRe: how to open creo 2.0 file in wildfire 4.0?
Steve, Thanks for the reply. I will attempt this next week - open a creo 2 file in wf4 using GCRI.
View Article