Re: file size wf3 vs creo2
No loss of data. I suspect it is built-in JT data for some of the advanced modeling extensions for faster loads. I only learned about this when I was making glamour shots (screen-caps) with high...
View ArticleClik here to view.
Re: Radius on an open surface
Extend the surfaces and trim the extra after the round.Sweep the round along two guide curves on the surfaces and merge.Define the surfaces with the round as part of it. Extend the round and trim it....
View ArticleRe: text display different in format drawing and PDF
Hi, if formats/drawings contain TrueType fonts in texts, then set Use TrueType Fonts option. If formats/drawings contain ProE fonts in texts, then set Stroke All Fonts option (in this case you have to...
View ArticleRe: Wildfire 2.0 at Windows 7, 64-bit, crash when edit a drawing
Hi Saju,I tried your suggestion and it solved the problem for me.Thank you very mutch for the help.Best Regards Per Forsman
View ArticleRe: Creo 2.0 M070 - many crashes!!!!!!!!!!!!
Same here, haven't had a crash since updating the graphics driver. Used the latest available graphics driver from Dells website, not NVidia.
View ArticleClik here to view.
Re: Flat pattern sheet metal drawing
l´m really sorry, but don´t understand yours replies Andrew Hermanson and Antonius Dirriwachter. Could you make a screenshot/picture what do you exactly mean? If l use BEND BACK it´s everytime push...
View ArticleExploded States, can you use an existing exploded state of a sub-assembly in...
Hi, I am producing an exploded drawing of a top-level assembly which includes a number of sub-assemblies with existing exploded views. My question is can I use these existing exploded views of the...
View ArticleClik here to view.
Re: Solidworks Weldment vs. Creo AFX?
I'm using AFX. http://communities.ptc.com/message/204289#204289 You will get the answer that you want
View ArticleRe: Line weights and PDF files
Hi Kaci, the pentable must work. If you need my further assistance, please upload some example drawing& model. Martin Hanak
View ArticleRe: Drawing Issues - Line Weights and Images in Tables
Hi Kaci, to create PDF file, use Save a Copy command (Creo Parametric 2.0) and select *.pdf filetype. Martin Hanak
View ArticleRe: Sketch View
Don, you are right, PTC model templates do not have views defined. Every user has to create your own model templates and define views inside them. Martin Hanak
View ArticleRe: Drawing Issues - Line Weights and Images in Tables
For 2D PDF Drawing output, I always use the Save-As>Export>PDF and run through the Options dialog (call up a saved profile). Since every client is different, I keep the print profiles in the...
View ArticleClik here to view.
Re: Flat pattern sheet metal drawing
It´s ABSOLUTLY perfect! Thanks you very much! Below is my solve (inspirated with your help) of sheetmetal unbend states in Creo 2.0. Used relations:...
View ArticleClik here to view.
Measure in Creo2
Hello,The measure command is taking more time in creo2. It was very easy to use this command in older versions. Is there anything that we should configure for making this faster ?? Any help would be...
View ArticleRe: Measure in Creo2
I prefer Creo 2.0 measure tools.You can select only one measure icon and then select geometry. What you select is measured.
View ArticleRe: Line weights and PDF files
Is there anyway I can send you an A size format file and see if you can figure out whats wrong with it? I'm about to call its quits.
View Articlehelp with best way to check out file
To all, We are using ProI 3.4 with WF4, probably until some time mid 2014. Our models at times, are large and can have family tables with hundreds of instances. So I am looking for what the best...
View ArticleRe: Measure in Creo2
This discussion comes up on a regular basis. Here is one of our distinguished user's take on the subject:Measure Tool in Creo 2.0 Can it be made better with what we currently have? You can always put...
View ArticleRe: Material Parameters within a note
This is where I get lost in how Creo manages linked data. If the table does it without rebuilding the table, then any place you use the parameter should work as well. Certainly worth a test or two....
View ArticleRe: Material Parameters within a note
I am familiar with relations, I guess I just wasn't sure what should be written for the relation. Thanks, Brock
View Article