Re: License request failed for feature PROE_ProcessModeler: -5:
having the same problem with proe wildfire 5.0 license request failed for feature PROE_DDiTy...
View ArticleRe: Need Help with Pro E 5 License request failed for feature
having the same problem it says license request failed for featureRequesting PROE_DDiTy...
View ArticleSketch common to several parts
I would like to have a sketch common to two parts. Is there a way to bring a sketch into a part (not an assemlby) and be able to modify it and have it update both or several parts? I think this is...
View ArticleHaving trouble installing 30-day trial of Creo 2.0
Hello, I'm trying to install the 30-day trial for Creo 2.0 and I cannot get it to work. The installer downloads and runs, but when I get to the point early on when Windows 7 asks me if it's OK for that...
View ArticleClik here to view.
Re: Same parameters on all sheets
I would have created a drawing template which includes the drawing parameters and use a drawing format that calls these parameters.New drawings should be created upon this template. I have never tried...
View ArticleRe: Interesting Observation - Offset Features
This issue has been submitted as SPR 2192810; stay tuned.
View ArticleClik here to view.
Re: Any Toroidal Bend experts out there?
Antonius Dirriwachter wrote: Ha!... yea, that's why I like Toroidal Bend It is a simple flat model that I want to use as a starting pattern. I made the mating part, slightly squished version using...
View ArticleC++ Migrated CAD Files
Hello Everyone.Need some help. We use to work with Inventor, now we are moving to ProE WF5 and all our CAD files has been migrated to ProE. I am having an issue when I work with the migrated parts, I...
View ArticleRe: How to display mesh on surface in Freestyle?
Yes, that's what I'm looking for. tangent_edge_display = solid did the trick! Thanks! I had it set to "no".
View ArticleRe: Tolerance mode: Nominal vs Limits
I am still getting the. "This will need to be approved by the moderator" on this post. Just thought I'd try a new one.
View ArticleRe: Creo 2.0 error 0xc6000005
Hey! So I got the same problem, I checked, the PTC Quality Agent is installed, yet it does not start when I try to start Creo Parametric 2.0. I started the Quality Agent manually, but it still produces...
View ArticleRe: Creo 2.0 error 0xc6000005
You can request academic support here: http://www.ptc.com/appserver/wcms/forms/index.jsp?&im_dbkey=142574&icg_dbkey=482
View ArticleRe: BOM Balloon Leader Problems
From my experience in WF5/Creo, the surface that the balloon is attached to is not showing up in the secion view therefor the balloon cannot attach to anything in the secion view. It's a pain, but if...
View ArticlePattern instances
I have a family table of an assembly, I have patterned a part but need different instances of this part to be shown in each family member. Example is I have 7 parts patterned in a direction, in the...
View ArticleClik here to view.
Dimension Text Placement
Creo Parametric 2.0 M050When placing a dimension in drawing mode. Once you make the final click to add the dimension. The dim text defaults to the center between the arrows. See image Is there an...
View ArticleRe: Dimension Text Placement
There is not any config.pro option that I know of, but you can temporarily disable this automatic positioning by holding down ctrl+shift. Few other tips to handle dims are documented here:...
View ArticleClik here to view.
Re: Pattern instances
Hi Steven, There are a couple ways you can do this. You can create pattern tables and call the one you want for each family table instance. A second way you can do this is to create two different...
View ArticleRe: Dimension Text Placement
Jakub, Thanks for the information. However, when I select Ctrl+Shift that puts my session into "Orient Mode". Can you revisit that response please. Larry
View ArticleRe: Sketch common to several parts
Hi Dale, The best way to do this would probably be to have the sketch reside in one of the parts and then create a Copy Geometry in the other parts using the Chain. Skeleton will probably work too but...
View Article