Re: Creo 2.0 - Datum Planes (older version vs. newer version)
Raymond, I am almost sure that it is not possible to display "old set datum symbol" in the drawing. Martin Hanak
View ArticleRe: Application MODELCHECK_DLL is not avaible or supported
Graham, I suggest to start with new clean Creo installation. Martin Hanak
View ArticleRe: Creo 2.0 - Datum Planes (older version vs. newer version)
You could make a symbol for the drawing that referenced the datum in the text portion of the symbol. "&dtm_b" will reference the "B" datum in the model. If you have an assembly you could add ":0"...
View ArticleClik here to view.
Re: Adding arrows to a half section.
I think you want an offset cross-section and not a half section. You have to build the offset x-section in the model, ie sketch the cutting plane. Oh, also, the side view is unfolded.
View ArticleRe: Creo 2.0 - Datum Planes (older version vs. newer version)
Try this ....in detail options...."gtol_datum"...set it to ansi
View ArticleRe: Relation between two different parts.
Find "top down design method in PTC Creo" in Google
View ArticleRe: Pro Program
For the momment I just make parts appear and disappear depending certain conditions/calculations.What I need is to know program well, so I can take the most of advantage I can, from it.
View ArticleRe: Pro Program
Check out the Help Topic Guide from Wildfire 4. There is a Program manual in there. If you can't find it, email me and I will send you a copy. looslib<at>centrusenergy.com.
View ArticleRe: Creating smooth blends
Here's the link to your model (for others): http://communities.ptc.com/docs/DOC-6463 Thanks, Dale
View ArticleRe: Pro Program
Luis,I have done this sort of thing before and it is relatively easy to accomplish in ProProgram. When I did this, I used the value of a given parameter to force ProProgram to suppress or keep active a...
View ArticleRe: Pro Program
Hi Mark, That is the way I do the stuffs, but I believe that I can improve the way to do and go further. Thanks
View ArticleRe: Adjusting Format To Fix PDF offset
Welcome to the forum, Jeffrey. I think you are dealing with a catch-22. The size of the drawing sets the size of the PDF and the offset is not accounted for. I have a feeling you will need to create...
View Articledetailing - cutout in welded assy to see interior
I'm trying to remember what this is called to no avail.I have a drawing of an assembly. In the top view I want to show the interior in more detail by hsving a sketched hole in the top plate. We used to...
View ArticleRe: Anyone have a list of Pro Engineer Tools & uses?
all the modelling tools, i am supposed to be exploring the tools that i will need to make a 3D model of a private jet
View ArticleRe: Anyone have a list of Pro Engineer Tools & uses?
Moody, Do you have to model the entire jet, including all systems and subsystems, or just a 3D image of the jet? For example, do you want to model a 3D surface of the entire jet? Welcome to the forum.
View ArticleRe: Anyone have a list of Pro Engineer Tools & uses?
thanks for clarifying this further Steven, since i am not the best at using ProEngineer and just want to pass the course i was looking to just make the body of the plane
View ArticleRe: Is there a way to fill the hole?
CATIA too does it successfully...Step geometry comes in much better
View Article