Re: Hide cosmetics in drw
ah I have 2 features - Cut + Cosmetic Thread (old Pro/E part) - Not group You have about 1 feature - Hole & Thread?
View ArticleRe: Hide cosmetics in drw
Yes, these are the threaded hole feature. You select the individual hole to use the erase. All the erase does is erase the cosmetic thread.
View ArticleRe: Right-click and middle mouse button does not work.....
This is extremely tricky for users of many other CAD packages. It just tripped me up which brought me here - thanks for the information!
View ArticleClik here to view.
Creating smooth blends
I want to design a channel that have a rectangular shape in the start and circular section at the end with a complex trajectory and some geometrical constraint (e.g. bolt boss). I used swept blend...
View ArticleRe: Creating smooth blends
To better understand question and try to create an alternative geometry could you post part of model?
View ArticleRe: Creating smooth blends
Rounds have a tendency to do that because they need to make true rounds and match tangency. 1st suggestion would be to create the rounds in the blended sweep sections. The section where the rounds...
View ArticleRe: Adding arrows to a half section.
Hi Andy, I want to bubble this to the top for you so other users can take another look. I haven't had a chance to test this but at first glance, I don't expect an option for this. You will likely...
View ArticleRe: Creo 3 - part rename in drawing
Hi Tomasz, When you were in Creo 2.0, you likely had the config.pro option rename_drawing_with_object which perhaps didn't carry over to your install of Creo 3.0. Try this option and let us know if it...
View ArticleRe: Creo 3 - part rename in drawing
For reference: https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS32342&source=tssearch
View ArticleRe: Balloon callout location on drawing grid in BOM
The following document might have some helpful information for this.https://support.ptc.com/appserver/wcms/standards/ssl/freefull_cskdb.jsp?im_dbkey=103942
View ArticleClik here to view.
Inland 4-Way Plate Medium Pattern
Does anybody out there happen to have a file showing the correct modeling of Inland 4-way plate medium pattern? I have looked all over the net trying to find something, with no luck. The Ryerson...
View ArticleRe: regarding the creo applications and topics related to creo useful for...
Hi Chandrasekhar, This post might be too open-ended. Creo Parametric has VERY broad spectrum of applications for engineering design. Can you tell us what you are looking to accomplish so the...
View ArticleRe: regarding the creo applications and topics related to creo useful for...
Hi Chandrasekhar, This post might be too open-ended. Creo Parametric has VERY broad spectrum of applications for engineering design. Can you tell us what you are looking to accomplish so the...
View ArticleRe: Creo View Express 3.0 Axis and plane display issues
Hi Miles, Creo View is not my specialty and I don't have the Express version available for testing but I have a couple suggestions. In Creo View Lite, I found under the Home tab > Filters icon >...
View ArticleRe: Restricted Parameters table for SMT_THICKNESS
Hi Antonius -Looks like your response cannot be viewed by the community - is everything good on your end?Would you please repost?Thank you,Toby
View ArticleRe: Aus einer 3D iges Datei einzelne 2D iges/dxf erzeugen
Simon, the German community is rather small in comparison to the international English community. So it is probably better to ask in English - if possible. So the goal is to output a model slice by...
View ArticleClik here to view.
Creo 2.0 - Datum Planes (older version vs. newer version)
All, I have spend many hours trying to figure out how to change a Datum Plane feature in the drawing mode; such as, verifying the older Datum plane option is active, etc,..... In a model and drawing...
View ArticleRe: Mold Design
unfortunately i cant pick any part. I was asked to make molds for these 2 parts. Still i cant find anything that would help me on youtube or ptc tutorials. Do you have any tutorial or images for...
View ArticleRe: Relation between two different parts.
There are many methods you can use in Creo for this: skelletons, relations, notebook (layout), publish/copy geom. etc.You just have to pick the method that is most appropriate for your requirement.
View ArticleRe: Tips for text
Are you familiar with Relations? You could set 2 driving dimensions (of different orientations) equal to each othere.g. &d23=&d41 (in this case d23 could be your 45º angle and d41 your 60º...
View Article