Re: Creo 3.0 Unite Technology Import Capability
Hi to all, maybe https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS134024 helps us to understand what versions are supported... Martin Hanak
View ArticleRe: About making draft lines
Thanks.I think that sweep is good way.But I don't understand how to create that shape. I tried, but my sweep edge's line isn't same (=draft lines). Please give me creo's data.
View ArticleRe: How to identify the model features in STEP file?
Felix, I think that the word feature mentioned on this web page does not mean "construction feature". Martin Hanak
View ArticleRe: B.O.M. balloons showing "ref"
Great scoot arounds - I'm constantly hounded by questions "why is this like this when {enter any CAD system} can do it?" - I can't answer after 14 years of using the software - this is still an issue....
View ArticlePro/Intralink 3.4 has detected an internal error. Anyone help?
PDMc_DataCursor::Open() failed
View ArticleError
any buddy guide me about these error when am try to open the file Creo 3.0 shutdown?
View ArticleRe: Create rip relief in mitered corners so it can be flattened.
Not being able to reliably manage the bend reliefs is one of the most annoying things about the sheetmetal module. Have you tried making the part solid and converting it? It seems to manage...
View ArticleClik here to view.
Re: Create rip relief in mitered corners so it can be flattened.
It's funny but it will do a v-notch into a flat plane with no trouble, but getting it to do this into a bend radius, not a chance! I know that when I try modifying a bend relief in the flat and try to...
View ArticleRe: Extrude
hi - it's strange what version do you use?? I create model in last released Creo3 F000 (x64). Now please look at sample stored in Creo2 (also x64). used sweep feature works identically in Creo2 and...
View ArticleRe: Create rip relief in mitered corners so it can be flattened.
Please vote on this idea...Sheetmetal - true "min bend relief" feature
View ArticleClik here to view.
Input Acceleration vs. Time for specific Datum Point on Tubing
Hi Everyone, I am new to PTC Creo and I am having issues solving a problem. I have a quarter inch tubing, 0.02" wall thickness, aluminum tube that is clamped on both sides ( ends can't move ). I know...
View ArticleClik here to view.
Re: Another equation curve approximation error
Support case submitted. Stay tuned. I just wanted to make sure people knew about approximations happening with certain types of geometry.
View ArticleRe: how to automatically place "style curves" on a layer?
Thanks! That's been bugging me for a while.
View ArticleClik here to view.
Re: Another equation curve approximation error
An SPR is being filed. Turns out the Wrap feature is also corrupt. A curvature analysis makes it pretty clear that the ends are not merging correctly with the continuation around the cylinder. The...
View ArticleRe: Another equation curve approximation error
Never did use Wrap to make springs. It's too difficult to control what you get. Plus it ruins the extents for the part. http://communities.ptc.com/docs/DOC-3063 To prevent the weird twist seen in...
View ArticleRe: Another equation curve approximation error
The evalgraph() is definitely a nice way to manage the extent of the part. But how do you get an equation into the graph feature? I thought about the second curve to manage the X-direction.
View ArticleClik here to view.
Re: Another equation curve approximation error
The second curve worked very well! Thanks
View ArticleRe: Another equation curve approximation error
It's almost like I've done this before, so I was confident a second equation would help. If you have an equation I suppose you could use that in place of the evalgraph for that variable in the relation.
View Article