Clik here to view.
Re: How to identify the model features in STEP file?
STEP files contain only geometry information, so all features information is lost by definition when exporting to STEP/IGES format and that's why it's often used to exchange data, so people get the...
View ArticleClik here to view.
Re: Creo - SharePoint 2010 - IE11
Script Debugging was not an issue.We solved it by using SharePoint 2013.
View ArticleRe: deletion of dimensions in drawing file
Welcome to the forum, Nirmal. Deletion is not permanent from the drawing. You can easily show it again with show annotation.
View ArticleRe: How to identify the model features in STEP file?
Hello,STEP files not only contains geometry information : It can also contains features or PMIs, especially in STEP AP242 which will become ISO very soon.More information here :...
View ArticleRe: How to identify the model features in STEP file?
please check my file and guide me how to work on it?
View ArticleClik here to view.
Re: About making draft lines
I've never seen that icon before. Are you using Creo 3? There are many ways to create and control parting lines using basic Creo Parametric. Essentially, parting line = draft hinge. In the standard...
View ArticleRe: About making draft lines
If I recall correctly, there was a tutorial that showed using offset surfaces (offset by 0) to create the two mold halves. This would effectively give you an edge to develop mold tools from.
View ArticleParasolid not opening
I have saved the CREo 2.0 file as parasolid(*X_T). Again i have opened the same in CREO. But it is not opening correctly. Some surfaces are missing & some surfaces are distorted. Why such problem...
View ArticleRe: Parasolid not opening
Welcome to the forum, Anuradha. Sometimes this happens depending on the complexity of the geometry. It is good you test the export. There might be some options in the export settings that will...
View Articlehow to convert this tube into sheetmetal
i have been trying to convert this tube into sheetmetal.i have used shell command to do it but its not happening.i have tried it using publish geomerty and then copy the surface to new part and then...
View ArticleRe: how to convert this tube into sheetmetal
Sorry but I still cannot open education versions. Sheetmetal typically expects cubical stuff, not pipes. For unbends that are more than a general bend radius, it needs to know about an axis. Flatten...
View ArticleClik here to view.
Re: how to convert this tube into sheetmetal
sir how to specify the point in flatten quilt which the software asks
View ArticleRe: how to convert this tube into sheetmetal
Is the quilt one feature or 2? Try this without publishing. Offset one-half the face of the tube. Place the point along the straight edge of the offset quilt. Try the flatten quilt on the 1/2 offset...
View ArticleRe: how to convert this tube into sheetmetal
This is a quick video: Attention:You will need to update your browsers Flash Player plugin to see videos on this site. Update your Flash Player here. Its free and fast.');}); });
View ArticleClik here to view.
Re: Parasolid not opening
These are the available export options for parasolid. They can be set in config.pro, or in the options dialog during export. Please note that this file may be created in your working folder and can...
View Article