Clik here to view.
Re: File management, sessions and lost work
I had also faced this problem, Creo page on facebook once suggested that we were to reuse the trial files when lost data after sudden shutdown. But that trick could not retrieve efficiently for a huge...
View ArticleClik here to view.
Re: Modelling a Reef Knot
Figured. I thought this would be cool to use for a coiled wire rope model.....
View ArticleRe: Modelling a Reef Knot
yeah it would, hopefully someone will work on that, I dont really have the time at the moment.
View ArticleAny experience with repackaging an install as a single MSI/EXE
Does anyone have any experience using a tool to convert any of the Creo suite to a single automated installation with an MSI or EXE builder?Such as InstallShield/Admin Studio, NSIS, WIX, etc. I'm...
View ArticleRe: Extruding From a Curve
Thanks to both of you; I knew that was the process to extrude but I was unable to. It was a settings problem; for some reason that layer-set the company uses automatically decides to hide the curve...
View ArticleRe: Very painful switching from SolidWorks to Pro/E
Here's an indepth demo of Creo 2.0, about 58 minutes. It's worth watching if you're new to Creo. http://www.ptc.com/product/creo/upgrade-resource-center/video/ptc-creo-2-0-demonstration.htm
View ArticleNew to Creo 2.0? Watch This Demo
If you're new to Creo 2.0, you may want to watch the attached video (58 minutes). http://www.ptc.com/product/creo/upgrade-resource-center/video/ptc-creo-2-0-demonstration.htm
View ArticleCreo Elements / Direct Drafting & WGM
Greetings, We are currently using Pro/Engineer Wildfire 4 M200, CoCreate Drafting and Windchill 9. We are going to upgrade to Creo Parametric 2.0, Creo Elements / Direct Drafting and Windchill 10.2.We...
View ArticleRe: CALLOUT_FORMAT in *.hol files
Hi Oliver, Kindly help me out how to open the A_DIN13-1.hol. file. IS that is opened in the notepad and then edited because this is first time i am listening about .hol files. This can also be one of...
View ArticleRe: CALLOUT_FORMAT in *.hol files
Hi Siva, you can open the *.hol files with notepad or any other text editing program. Regards,Oliver
View ArticleClik here to view.
Customizing graphic toolbar
Good day to all. I am currently running Creo Parametric 2.0, Date Code M100. I am wondering if anybody has found a way to customize the graphics toolbar? I currently show the following; see attachment....
View ArticleRe: Customizing graphic toolbar
Hi Dean, Unfortunately, the Graphics Toolbar cannot be customized.https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS48708&source=tssearch
View ArticleRe: position des cotes de diamètres / diameter dimension position
This document might help.https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS25598&source=tssearch
View ArticleRe: Cross Sections in a drawing mode - Creo 2.0. why is it so hard!!
I'm going to guess this isn't a question because the simply answer is that PTC has always done it this way in Pro|E. Just because the look has changed doesn't mean the underlying code has. Actually,...
View ArticleRe: PTC font -
Hi There, I am new around here. I am trying to cut a logo into a model; i.e. if I followed the conversation correctly. Can you point to a procedure or method I can use? I am stuck on how to get a...
View ArticleRe: PTC font -
Hello Chris and welcome to the forum. There are two ways to "engrave" or "emboss" text and logos onto a surface. Flat surfaces obviously benefit from simple extrusions, but curved faces can be done...
View ArticleCreo can't see files on the network
Hey all, been struggling with this issue lately and can't figure out what is going on. We're running creo parametric 2.0 and have two computers with their own licenses, and storing all the files on a...
View ArticleRe: Models detailed and simplified
Hi Everybody,I really need a solution for bellow scenario: - I have a CAD model with all the details. This model it's used in manufacturing to have proper drawings and models to generate the CNC - On...
View ArticleRe: Models detailed and simplified
That is the purpose of shrinkwrap. Of course, you want to export the file in some other format than the native Creo files. I have often run into this requirement and I do not find Pro|E to be easy...
View ArticleClik here to view.
Re: Models detailed and simplified
shrinkwrap usually doesn't work very well: 1. sbould be able to change the models, rotate them when are imported in a different software.2. most of the time the when shrinkwrap is generate the surface...
View Article