Re: Can I do multi-line GD&T Composites yet?
It seem just a single composite line, but you can add a new Gtol and set the placement to Other Gtol as attached. Don't know if it suitable for your case.
View ArticleJog in radial or diameter (diametral) dimension
Can you put a jog in a radial or diameter (diametral) dimension? Or are jogs only for notes and annotations?Thanks, Dale
View ArticleSerious Question: Why does PTC take so long to fix known problems?
I know that I am asking a question that opens the door to a lot of frustration so please limit to constructive responses. Every type of PTC software that I have used (ProE/Creo, PDMLink/Windchill, this...
View ArticleRe: Jog in radial or diameter (diametral) dimension
I don't think you can place a jog in a diametral dimension. Every time I have tried Creo gives me the error message "functionality is not available on the selected item". For items like this i just...
View ArticleTruncate dimension in a drawing
In a similar thread, there was a way to truncate the output of a parameter used as a dimension in a drawing (See thread: http://communities.ptc.com/message/191893#191893 ). What I am looking for is to...
View ArticleRe: Creo vs. Solidworks vs. Inventor
I worked 10 years with Autodesk Inventor, and then, switch job to a company that uses CREO 2.0 and Solid Works. In this past 6 months, I used both CREO 2.0 and SW, changing from one to another because...
View ArticleRe: Tips for text
Naveen,Welcome to the forum. PTC is in the process of creating an editor where "What you see is what you get" per this product suggestion. I am not sure if this is available yet, or if it is going to...
View ArticleRe: How to do Exploded view with specified dimensions in Pro-E WF 5.0
Yes Steven Dunker :-)
View Article.PTS file error
when ever i try to open pts file from my desktop to pro e it says no points found in pts file. while i have tried several times, kindly guide me where i'm doing wrong, the following are the points....
View ArticleRe: .PTS file error
You need 3 coordinates for each point. You'll select the meaning of the points by selecting the type of coordinate system. In this case, R, Theta, Z.
View ArticleDatum names on model
Dear Community, I am a fairly new user and have seen the datum names on the planes in the model - i,e on the model, the 'top' 'right' and 'front' planes are named so it is easier to select them. I...
View ArticleClik here to view.
Re: Datum names on model
In file - options - Configuration Editor - search for display_plane_tags option and set it as "YES", or this can be done in your config.pro file add a line as display_plane_tags yes..
View ArticleRe: Truncate dimension in a drawing
Dale, did you try to truncate dimension value in Properties dialog box ? Martin Hanak
View ArticleRe: Very painful switching from SolidWorks to Pro/E
You do not need to add refs first. If you select the constraint you want (coincident, parallel, etc), then the sketch entity you can select any appropriate geometry from the model to use. Be aware,...
View ArticleRe: Very painful switching from SolidWorks to Pro/E
In SW, edges are all you can use to align your sketches. In Creo, you can align sketch geometry to surfaces that are normal to your sketch as well. Surfaces are much more robust than edges and will...
View ArticlePro Toolkit Help: Problems moving some detail notes
I am new to toolkit and am having trouble moving detail notes attached to the detail boundary in the parent view i.e., when a new detail view is created, a note attached to the detail boundary appears...
View ArticleRe: Very painful switching from SolidWorks to Pro/E
If there is a sketch you think could be done more easily, post a screen grab and people can help with that. No one here can change how Creo works, at least not for a couple of years, What you are...
View ArticleRe: Creo parametric 2.0 crashed during startup
Where is this file found, so I can edit it?
View ArticleRe: Very painful switching from SolidWorks to Pro/E
Reminds me of the good 'ol days. Wonder how long it's been since a whitepaper was submitted.
View Article