Parametric.exe will not run
We just recently updated to Creo 2.0 M100 from M070 and ran into one problem. When you try an run the parametric.exe in the bin directory nothing happens. Same for simulate.exe and creosysmon.exe....
View ArticleRe: Parametric.exe will not run
Hi Justin, Possibly this is due to incomplete installation of Creo Parametric, look for xtop.exe in <Install Location>\Creo 2.0\Common Files\M100\x86e_win64\obj. If it is not available, uninstall...
View ArticleRe: Parametric.exe will not run
xtop.exe is there. I did run the program Beyond Compare on that install compared to another install that is working and all the files in the working one DO show up in the one that is having issues as...
View ArticleRe: Parametric.exe will not run
As it is not starting with parameteric.exe, can you make a try with parametric.bat. Sometimes .exe’s may fail to start but works well with batch files.
View ArticleRe: Deciphering traceback.log files
the support techs tell me these logs are of little use to them.
View ArticleRe: modeling balloon inflation/deflation
Thanks for the reply; got as far as creating the solid, shell, and analysis feature, but couldn't figure how to write the relationship syntax to make it work. Plus not sure if I used the correct...
View Articlesplit bom list
Hello coleagues, I have this issue. In attachment there is a drawing of an assembly with only one part in it, 5 times. Im making assembly cut and that cut is affecting 3 parts. In drawing then i have...
View ArticleClik here to view.
Creo Sheetmetal Unbend Feature Failure
Hi, We are trying to unroll tubes from a chassis created in the AFX extension in order to produce templates for tube notching. The way we do this is by opening up the part for the tube and...
View ArticleRe: Creo Sheetmetal Unbend Feature Failure
Flat patterns can be very fussy. You need to go in and redefine the flat pattern and see if you can find the error. I tend to use the bend and bend back more often for simple operations such as this.
View ArticleRe: Creo Sheetmetal Unbend Feature Failure
Try changing the part accuracy, possibly to absolute accuracy so that it matches across all the parts in the assembly.
View ArticleRe: Creo Sheetmetal Unbend Feature Failure
I haven't been able to do any of this properly. I can't bend back any of the tubes (ones where the unsupressed flat pattern regenerated and ones where it didn't). Also I can't get sketched rips to work...
View ArticleRe: Creo Sheetmetal Unbend Feature Failure
That is my experience as well, Hafeez. I find it absolutely frustrating to try to use the advanced features where rip rarely does what I want it to do. However, some people can really shine with the...
View ArticleClik here to view.
Re: Creo Sheetmetal Unbend Feature Failure
When I look back at your first images, you are revolving some of your cuts where the edge if the metal is not "square". This is a machining process that causes angled edges in the flat pattern. Where...
View ArticleClik here to view.
Re: haiiiiiiiiiii
Insert a style feature from the Model tab under surfaces. Once inside the style application, create a curve. Hold down the SHIFT key and select each of your points (if they exist as datum points in...
View ArticleRe: Creo Parametric 2.0 - Student Edition to Full License Compatibility
Hi Justin, There is a license module available called EDU_COM_CONVERT for converting Educational versioned files into Commercial files. I'm not certain that the converted file will have full features...
View ArticleRe: Deciphering traceback.log files
I will remember to include your post, Clint, next time I submit the case with the crashlog.
View ArticleRe: Trial file open
Previous file versions (e.g. part.prt.2 > part.prt.3) can be found in the directory where the file resides. By default, Creo will retrieve the latest version. You can view all versions in the File...
View ArticleRe: New to Creo. Cannot create first part. Stuck on welcome window.
Hi Ian, Could you provide a screenshot of what you are seeing? Are there any errors in the message log?
View ArticleValidation of Creo from Pro-E / Wildfire
Greetings,Anyone have validation data on upgrading from Pre-E/Wildfire to Creo?We are looking for evidence that the SW upgrade does not change the CAD data.
View ArticleRe: RE: Layers in WF3 drawing formats
So, does anyone know how to access the layers in a Format? We have layers in our formats and cannot get to them in WF4.
View Article