Re: Showing Units in Model Tree - Wildfire 2.0
Hi Suresh,Did you figure out how to display the units in model tree? I am trying to do that. You help would be appreciated.Thanks.
View ArticleRe: RE: Changing Parameter Type
please refer also to CS154056https://www.ptc.com/appserver/cs/view/case_solution.jsp?n=CS154056&lang=en
View ArticleClik here to view.
sweep not properly supported in sheetmetal?
Im trying to create an assembly with lasercut tubes.For each tube I use my skeleton model (external merge), switch to sheetmetal and add a sweep. To get the ends to fit to other tubes, I try to add...
View ArticleVirtual Desktop using Nvidia Grid GPU
My company is in the process of picking out our new workstations and one of the options is to use a virtual environment using Nvidia Grid GPU technology. Does anyone have any experiance with this yet?...
View ArticleRe: sweep not properly supported in sheetmetal?
In sheetmetal, you can make sheetmetal cuts and solid cuts, at least with an extrude. It's an option on the feature dashboard. Check in your sweep if that option exists. A sheetmetal cut produces...
View Articleaccessing a Solid Edge.dft file in Creo 2.0
Does anyone know a way to read a Solid Edge.dft file in Creo 2.0. I have a client who gave me this file and wants me to get model together for 3d printing. I need to know if there is any way to read...
View ArticleRe: sweep not properly supported in sheetmetal?
Normal to surface cut is not an option in the sheetmetal dashboard for sweep, at least in my Creo version (2, M90). You can see this in the screenshots Ive added.My question is: does anyone know if...
View ArticleRe: sweep not properly supported in sheetmetal?
Tubes are not a sheetmetal application. Sheetmetal tried to maintain normal edges in an unfold state so I tries to show the deformation when it is folded. In reality, sheetmetal does a surface offset...
View ArticleRe: sweep not properly supported in sheetmetal?
A tube may not be sheet metal, but this is a moderately clever abuse. Since the target use for the information is a laser tube cutter and a laser can't make decent tapered cuts in what is essentially...
View ArticleClik here to view.
Re: sweep not properly supported in sheetmetal?
Now I see what you meant in the original post. Yep, no option for "normal" in the sweep feature. Easy fix is to use the inside edge to create a second sweep:
View ArticleRe: Reference cannot be used due to the scope setting of SKELETON for...
Solution steps: 1) Go to File > Option >Configuration Editor 2) Select > Add.. Tab3) Option name : default_ext_ref_scope4) Option Value : all*5) Click : Ok
View ArticleClik here to view.
Re: problem with BOM
You use the recursive command. Here's the click order, table tab, [repeat region][flat/rec item]choose the table by single clicking itthe recursive item will pop up, choose all items in the table by...
View ArticleRe: accessing a Solid Edge.dft file in Creo 2.0
Referring to the following article:https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS127522&lang=en Creo Parametric 3.0 can import native Solid Edge Part (*.par) and Assembly (*.asm)...
View ArticleClik here to view.
Error: Breaks Group
This error just started popping up. Any help / clue as to what may be causing this: Thanks, Dale
View ArticleRe: Error: Breaks Group
I don't recall being able to do anything to fix it; just have to ungroup the items and recreate the group. I take it as in error internal to the way PTC manages groups. I usually use groups to control...
View ArticleFormat of Hole Table For Points
Is there any way to control the format of a hole table that is showing datum points? A couple of areas have proven difficult: I'm trying to only show specific sets of points, but it insists on listing...
View ArticleClik here to view.
Re: Reference cannot be used due to the scope setting of SKELETON for...
Or, alternatively: And then save it to your config.pro when prompted.
View ArticleRe: Creo2: Create 3D model Annotation/Note Flat to Screen with a Leader?
The Video combined with the instructions on the other forum did the trick. My coworker, found and posted the steps more precisely. So if anyone else has this problem, go to the above mentioend...
View ArticleClik here to view.
Angular Dimensioning
Does anybody know how to get an angular dim as shown in the image? (in Creo Parametric 2.0),
View Article