Re: Using text in creo parametric
You cannot "warp" the characters to conform to the circular curve. You can only "place" the characters along a curve. If all you want to do is use the curve as a reference, use it as a section...
View ArticleClik here to view.
Re: Using text in creo parametric
I guess I don't fully understand what you want. If you want it placed on the curve, then you can put the curve where you want it?
View ArticleClik here to view.
Clik here to view.
having problem saving file after doing piping on chassis in EFX
after doing proper tubing and cutting in EFX extension in creo parametric i am having problem in saving the file .can anyone solve this problem of mine
View ArticleRe: Mechanica..Elasto-plastic
For those following this thread I am finally getting around to summarizing what I found. I have discovered certain limitations using LDA, specifically the plasticity combined with contact, but I...
View ArticleRe: BOM-show all part & qty of Assembly in table in Creo Drawing
Dear BLUE DUNCAN Thanks your helpNow is ok Thanks & Regards
View ArticleWhere can download Creo 3.0 Beta?
It seems that Creo 3.0 Beta is available to use for some customers, but it is still not in download list. Do you get Creo 3.0 Beta media?
View ArticleRe: Where can download Creo 3.0 Beta?
I just got from GS team. I think you may seek help from GS team or Technical support team.
View ArticleCreo 2.0 M090 - Mirror a part in an assembly
Hello !I just migrated from WF4 to Creo 2.0 M090 and I'm trying to mirror a part in an assembly, using a datum plane as reference. I am selecting the part, selecting the datum plane and using the...
View ArticleRe: Creo 2.0 M090 - Mirror a part in an assembly
Welcome to the forum. You can't create a mirror of the part such that it would create solid features in the assembly...unless you only have cuts. If you don't want to create another part, then you...
View ArticleRe: Creo 2.0 M090 - Mirror a part in an assembly
The suggestion by support was correct but the terminology used in Creo (and pro/e) has always been misleading. In an assembly, you can create a mirror placement of a current part by selected the create...
View ArticleCreo Iges to Mastercam Help
Looking for some help on translating Creo 2.0 IGES file to Mastercam properly. The math is coming across in straight lines where it should be curvature (cordial divide). I understand that it has...
View ArticleRe: Creo 2.0 M090 - Mirror a part in an assembly
Great !The option "MIRROR PLACEMENT ONLY" was the missing point.Without I was creating an unwanted new part.Thanks a lot !!!
View ArticleClik here to view.
Re: Edit Creo Relations with Notepad++ instead of the default editor
Hi Brian, Np, I took a while to reply here as well. I've never used Pro/PROGRAM for anything, I only got basic idea of what it can do but I've never been able to think of a case where I would really...
View ArticleRe: switching from Solid Works to Pro-E
I used ProE for ~10 years, switched to Solidworks for the last 3.5 years and now I am back using ProE.The biggest difference between Solidworks and Proe is that Solidworks is very intuitive and easy to...
View ArticleRe: switching from Solid Works to Pro-E
I've had to use SolidWorks for the last 6 months and I hate it! The worst software package I have ever used excepting Shoptech E2. I'll take Pro/E, Catia or UG any day.
View ArticleRe: I'm getting tired of this! - helical sweep failures.
"So why does this work if you use a sweep along a guide creating exactly the same geometry?" Because it isn't creating exactly the same geometry. It is only very similar, but not the same. It probably...
View ArticleRe: I'm getting tired of this! - helical sweep failures.
It is certainly the same within the relative tolerance range. Every measure is identical to the Nth degree.
View ArticleRe: I'm getting tired of this! - helical sweep failures.
You are limited to the filtered measurement reporting of the software, which is not the same as knowing the underlying models are identical. You can try generating a STEP file for each to see if the...
View Article