Clik here to view.
Re: Creo Parametric 2.0 - Pattern Features on a Curved Component
Thanks for the response. This works, as shown below. I was making this more difficult than it should be, as I was trying to pattern on a curve, not dimension.
View ArticleRe: Creo 2 users please help with system build
To enable ECC you have to use a Xeon. So I've been conteplating building a system with either a E5-1650, 1660, 1650 v2, or1660 v2 Xeon since I hear they are unlocked, just like their 3930k, 3970k,...
View ArticleRe: Creo 2 users please help with system build
Good pick on the SSD's I guess. I've had to deal with one of SSD's from Kingston couple of years ago. It kept throwing in BSODs even after I updated the firmware, so unplugging it was the only options....
View ArticleEditiable annotations/dimensions
Hello all, I have setup a gear within creo and displayed the editable parameters as annotation. The attached picture explains this a little better. My problem is, I can't seem to figure out how to...
View ArticleClik here to view.
Re: Creo 2 users please help with system build
Just FYI. This is a pic of the memory spreadsheet I made, the memory prices are probably almost a year old now. I made this early into my new PC planning and I always wanted to better understand memory...
View ArticleClik here to view.
Re: Editiable annotations/dimensions
To do it in the part model, create an annotation note and reference your parameters with a &. See image below. When you double-click the annotation in the model, it will prompt you for the value...
View ArticleRe: Started Off Fine And Then Things Are Working In Slow Motion Now!
Hi John, Have a look at SpaceClaim, it's pretty powerfull, but still pretty simple.
View ArticleRe: Piercing a tube to create a boss.
Hi Dale, Have you tried to filter the repeat region (your BOM) with the value of the user-defined parameter? I don't work with family tables. I'm not sure if it could work this way. Could you post an...
View ArticleBob Swgold
I am having problems installing Creo to run on my computer could it be because I am still running Vista
View ArticleRe: Piercing a tube to create a boss.
The tubing that we buy are precut lengths and not just random 20's. So we order size specific parts that may (or may not) have secondary operations done to them depending upon what type of parts need...
View ArticleRe: Piercing a tube to create a boss.
I see what you want, but it's going to be rough going getting it. For example, if this was a rivnut, you'd have no problems because it would work the way you want. It is impossible for it to both be...
View ArticleRe: Piercing a tube to create a boss.
Forgive my ingnorance, but can you do repeat regions without having an assembly? As for the model and the drawing, the owner is the company is very particular, so I can do small screen dumps of not...
View ArticleRe: Import Data Doctor
Mike, I've attached PTC's instructions on how to use the Import Data Doctor (IDD), a 54 page pdf file.
View ArticleRe: Piercing a tube to create a boss.
"Currently with this and a couple of other operations, I have to modify 3-4 different parts to get the one length change that I want instead of doing one length change." For those who have a similar...
View ArticleRe: Bob Swgold
Welcome to the forum. Check out this link and see if it answers you question: http://www.ptc.com/WCMS/files/135225/en/creo2_hw_notes.pdf Thanks, Dale I do not see Vista on the list, but that may not be...
View ArticleRe: Import Data Doctor
Hi Mike, After importing the STEP file, are the surfaces purple? If they are, then you have surfaces and not a solid. By default, Creo shows surfaces in purple and solids in grey. If you have just...
View Articlepartial view boundary spline line type
Getting back into using Creo 2.0 daily, and finding lots of power and features, this forum is a great help.Anyhow, I'm doing a partial view, sketching the spline around the perimeter. Is there a...
View ArticleClik here to view.
Re: how to show or draw center mark
Dale, this is the result of a work around that I was creating, but found out the hard way if someone responds to your post, it is no longer editable??>. LOL These results can be accomplished by...
View ArticleRe: how to show or draw center mark
From the revolve itself, there should be an axis that you could show through the annotations both the longitudinal axis and the centermarks on the end view.
View Article