Exporting DWG/DXF bulk + file name change
Hello! I have a customer that I export sheets into individual DWG (or dxf) files for, the sheets are one component per sheet (what they want, makes for a lot of sheets) and they want the DWG files...
View ArticleClik here to view.
Exploded Detail Views / Center Align Dimension Text in Drawings
Hi all, Is it possible to explode detail views? I'm trying to make my angle dimensions easier to read. Also, is there a way to center the text for my diameter dimensions? For some reason the text...
View ArticleRe: Exploded Detail Views / Center Align Dimension Text in Drawings
Kaci,I am not sure what you mean by explode. If you mean converting it to line entities, I highly recommend that you do not do this in that you will loose any functionality of updating the view. If you...
View ArticleRe: Exploded Detail Views / Center Align Dimension Text in Drawings
Hi Dale, I just need the thread detail lines that are blending in with my angle dims 60 and 20 to be lighter or not shown at all. - Kaci
View ArticleClik here to view.
Re: Graphic display problem
Thanks martin We fixed this problem by altering the config.pro
View ArticleRe: how to show tolerance on drawing with letters instead of a nominal value
Thnx Antonius, since i am using dual dimmensioning this solution seems to be the only one. One think which is not very good is that i cannot use "S" to connect the letters with the dimmension ID and...
View ArticleClik here to view.
Re: Creo 2.0 drawin customize table
Hi, we can change diraction of table in CREO, but i found some problem when i using repeat region and i'm using Diraction Down to up so Potition of my table is going down. Could you give me any adivice...
View ArticleRe: Graphic display problem
Bryant, clean new installation is the only way how to get reliable installation of PTC software. UPGRADE can (but does not have to) provide reliable installation of PTC software - you never know, what...
View ArticleClik here to view.
Re: Wrapping Rotor Blade Curves from Sketch - Wrapped Curves Shift
With your modeling tip, I was able to finish the rotor turbine, as you can see below. This part goes in the F-18 Hornet. Thanks for the support.
View ArticleRe: Graphic display problem
"We fixed this problem by altering the config.pro" What did you change in your config.pro?
View ArticleRe: Graphic display problem
Did you update from Wildfire 4.0?Then the new (since Creo Elements/Pro 5.0) default for the selection filter (All) in combination with preselection highlighting might surprise you by causing a lot of...
View ArticleRe: ! failed to save an OLE object (Painbrush picture)
Alright I believe you. I still am having trouble importing anything greater then 500kb.Is there a local setting that will govern this?
View ArticleRe: Creo VBA API for drawing table update.
Hugo,What you are describing is exactly what I was trying to do! Loop thru the first value in all tables to try and find the one I am looking for and update its values. It might take me a day or two to...
View ArticleClik here to view.
Re: ! failed to save an OLE object (Painbrush picture)
Antonius,What computer are you using? what Operating system? and what build Creo are you using?I am on a Lennovo THink station (6 core Xeon) running Windows 7 and on Creo 2 M50.I am still limited to...
View ArticleClik here to view.
Re: Wrapping Rotor Blade Curves from Sketch - Wrapped Curves Shift
Very nice work! Glad I could help
View ArticleWho do I get a family table into a drawing?
What is the easiest way to get the data from a family table onto a drawing for a tabulated part? In the past I created a table in the drawing & manually entered the data into it from the family...
View Article