Re: Interesting Observation - Offset Features
Hi Tom,Yes this is strange. I have not used Offset in this way. I have used it countless times to do a simple offset of a surface (or quilt) and have also used it to replace a surface (but quite a...
View ArticleRe: Interesting Observation - Offset Features
Solid should find their own intersection,offset feature is like cross between surface and solid maybe that's why.just guessing. also sometime i find need for "select offset upto or hold shift to catch...
View ArticleRe: Mechanica..Elasto-plastic
Randy, Anisotropic materials are not yet supported in LDA. Unfortunately, the same is true for preloads in LDA since that requires a similar formulation. Sorry. Not very difficult to implement. We...
View ArticleRe: Why is pdf export still crap?
The attached image shows pentable settings, location, config options and a comparision of what is being seen when exporting a pdf and what is on screen. All pointing to the right place with all pens...
View ArticleRe: Creo 2.0 - Attaching to Dimensions (Geo. Tol., notes, etc.)
It is always hard to know what you are looking at when you see it on a drawing. The .0001 tolerance really should have been a tolerance as part of the dimension. If you don't know to change the detail...
View ArticleClik here to view.
Re: Creo 2.0 - Attaching to Dimensions (Geo. Tol., notes, etc.)
The option is not always available as it is dependent on the tolerance type that is selected but when it is available, you will have the option to attach the GTOL to the dimension using the GTOL...
View ArticleClik here to view.
Re: Why is pdf export still crap?
Remove those entries from the config.pro and make a file named table.pntAdd the following to the file: make sure the file does not have a hidden .txt extensionpen 1 thickness .002 inpen 2 thickness...
View ArticleRe: Contacting Brent Drysdale re ProE/Croe stuff
Thanks Dan.Back to WF4 for now but maybe Creo 2.0 soon. Should be fun. Who knows one day may get to see you at a conference again but no expectations on that. Regards, Brent
View ArticleRe: Contacting Brent Drysdale re ProE/Croe stuff
Thanks Frank,Choosing not to start for another month yet. Plenty to get sorted before shifting.Regards, Brent Drysdale
View ArticleClik here to view.
Re: Assembly cut?
I go with Tom but then TDD is pretty much second nature to me.If you don't have this or simply want to do it another way then: Make an assembly surface of the outside of the parent tube then use this...
View ArticleRe: Why is pdf export still crap?
I had a lot of trouble getting PDF's to plot correctly, too. Here is what I ended up doing: Put the following lines in your config.pro file: pdf_use_pentable yesuse_8_plotter_pens yespen_table_file...
View ArticleRe: Tolerance mode: Nominal vs Limits
I knew about the limits wanting to change the CAD before and yes that is distubing. Especially for shafting and bearings where you have one sided tolerance and someone wants them displayed with limits...
View ArticleClik here to view.
Re: Table Relations - Search Function
Good, I took your example repeat region relation: POSITION=search(asm_mbr_description,"SUB")IF POSITION>0 QUANTITY="--"ELSE QUANTITY=rpt_qtyENDIF And then changed asm_mbr_desctiption to...
View ArticleRe: Tolerance mode: Nominal vs Limits
All my old 2000i drawings, and several imported Pro|E parts from internet libraries come in with limit dimensions assigned to all model dimensions. Very annoying. I just tested Creo 2.0. Assigning...
View ArticleRe: Tolerance mode: Nominal vs Limits
It's not a problem with converter. In all versions, default_tolerance_mode is an option also in config.pro and it also governs tolerance mode for parts' dimensions in 3D mode. Prior to Creo release...
View ArticleClik here to view.
Re: Tolerance mode: Nominal vs Limits
Interesting. That means that dimensions that -were- changed to a different mode such as +-symetrical, they should not have changed on drawings or in model sketches when opened in later versions....
View ArticleClik here to view.
Re: Tolerance mode: Nominal vs Limits
Yeah, I think they remain with changed tolerance mode, but I'm home now and have no way to verify this . And yes, I've been through this couple of times, but from different angle: I work for Polish VAR...
View ArticleRe: Creo 2.0 - Attaching to Dimensions (Geo. Tol., notes, etc.)
Thanks Antonius, I'll have to look for the "relate to object" feature as I've never seen it, just "relate to view". It may help with revision balloons. Knowing that I can edit the feature control...
View Article