Re: Extract numbers from string in creo
Are the occurences of numbers in that string random? Is the string's length also random?
View ArticleRe: How do you manage springs
Just adding this in late, but how about using Interchange Assembly and Pro/Program?
View ArticleRe: How do you manage springs
There is no such thing as late in this discussion. It is an exploratory discussion to ferret out the best way to achieve a real world operation. I have never used Pro|Program and I know nothing about...
View ArticleClik here to view.
drawing number in repeat region
does anyone know how to get the drawing number (in this example) "1119" and "2222" to show up on this bom for each line? i cant seem to figure out how to get the drawing number to show up except in the...
View ArticleClik here to view.
Re: Varying Perimeter
Here is an example of several ways to use a perimeter. The 1st is creating a perimeter dimension within the sketch, making the "slack" radius the variable. Test the sketch for robustness. The 1st...
View ArticleRe: Varying Perimeter
Oh, the little note on the model screen is a note with the relation from the measure feature. If you are using Creo 2.0 full version, I can post the file (not academic compatible).
View ArticleRe: Extract numbers from string in creo
I can only see this in an extensive -IF- clause that evaluates each entry in the string as a valid "numeric" string that represents a number and next, determine the length of the full number string......
View ArticleRe: how do you constrain to a floor when simulating?
Ok guys, thanks sofar.. Ive created a rigid link on the top-surface of the "floor", and constrained all other sides.I got the following warning when the top-surface was also constrained while having...
View ArticleRe: How do you manage springs
So here is the real world scenario for a lot of these "best practice" discussions. Yes, we can get fancy and to employ mechanism is an interesting idea but is it necessary? Obviously it shouldn't be....
View ArticleRe: How do you manage springs
Tom, the beauty of flexible components and mechanism is you only have one model. Users of a PLM system will appreciate it as no unnecessary objects have to be handled.In drawing you can attach a...
View ArticleRe: How do you manage springs
I will have to look into snapshots for views more. This could have strong implications in view management. Am I correct in assuming by mechanism you simply mean mechanism assembly contraints? This is...
View ArticleClik here to view.
Re: How do you manage springs
I got the closed end managed by relations in the Wrap sketch. Now I only have the one variable... or possible flexible component value to manage. Much better! To explain the sketch: WRAPS is the...
View ArticleClik here to view.
Re: How do you manage springs
Hmmmmm, looks familiar...... Nice! sorry I haven't had much time to look at the file, I'm getting ready for my trip!
View ArticleClik here to view.
Re: How do you manage springs
Have a safe trip Frank! (and no, I haven't peeked at your file )
View ArticleRe: How do you manage springs
Hello Tom,- I use mechanism kinematic (formerly MDX) which is part of the foundation packet. - You can write a relation like if d23 > 60d23=60endifif d23< 40d23=40endifbut I havent tried it with...
View ArticleClik here to view.
Re: how do you constrain to a floor when simulating?
For the horizontal bolt, make another rigid link and select all surfaces of the bolt. Don't forget to set up your contact surfaces. I did a quick test and had success. For the floor and integrated...
View ArticleInstall problem with Creo elements direct graphics error
I am trying to install Creo Elements Direct Modeling 4.0 on a computer. Everything installs correctly, and the program comes up, but the viewport is locked, and I get the message "vport1 frozed due to...
View ArticleRe: how do you constrain to a floor when simulating?
Thanks a lot, Im using CREO 2 simulate.So at model setup, I select "free".Then at the "Refine model" tab, I select "interface" and select the bracket and floor.I do the same for bracket and horizontal...
View Article
