Re: Fehler in Creo Elements Direct Modelling: '1' aufgrund eines...
Ich konnte das Problem mittlerweile eingrenzen. Ich habe das Programm hier auf dem Rechner installiert (Lenovo Thinkcentre M71e), Win7 32 bit. Dort lief es zuerst auch problemlos. Danach deinstallierte...
View ArticleRe: creating variable radius round
I agree, it's a total pain. The creo GUI's are so full of FAIL in most every area. Which, is totally ironic since that's really all the "enhancements" are.....
View ArticleRe: Limit dimensions unable to edit Tolerance limits
moved this discussion over to the Creo forum so that other may benefit.
View ArticleTOLERANCE PLACEMENT
Is there a setting to place the tolerance above the dimensions?Using wildfire 4 and up. example: +0.005 [+.0002]-0.000 [-.0000]36.000 [1.4173]
View ArticleRe: Creo Won't Open Files from directory
File associations are linked to specified "token" in the system, which in turn has a defined path to application which should open given file extension. You can change it quite easily with command...
View ArticleRe: Symbol in a table cell
Jakub,Thanks. I really appreciate all the help that is available through this forum and for the occational laugh. Dale
View ArticleEnd of a paramter in a text string
When you write a parameter in a text string, ¶meter_name, is there a when to let the text know that the parameter is done other than a space? i.e. ¶meter_name_COLOR where Parameter_name...
View ArticleClik here to view.
Re: End of a paramter in a text string
If not, is there a way to do a half space (like the old fashion typewriter).
View ArticleNVidia OpenGL Driver
Two of our users with the same exact machines are getting the error below when trying to print within Creo view 1.0 to a Xerox wide format printer. "Your hardware configuration does not meet minimum...
View ArticleRe: Creo Won't Open Files from directory
Cool thanks for that info, I managed to get over the line with a combination of this and some registry editing.
View ArticleRe: Creo 2 drawing dimension tolerance
I am having the same problem. Tolerance Mode is not selectable. File >options >entity display > show dimension tolerances is not a solution. What kind of drafting package has an option...
View ArticleRe: Symbol in a table cell
It worked yesterday, but that must have been since the symbol was loaded into memory. Today, it is not working.What were you going to say about the not loading the symbols?
View ArticleRe: Symbol in a table cell
What if you loaded the symbol in the part/asm file used in the drawing?
View ArticleRe: Symbol in a table cell
The symbol in my case is the company logo. Not really needed in the part/asm file. I was just using that case as an example.
View ArticleClik here to view.
Re: Creo 2 drawing dimension tolerance
Did you change it in your prodetail.dtl? Which is the same as going to attached picture then on Detail Options hit Change.
View ArticleRe: NVidia OpenGL Driver
I am assuming it's a driver issue because I tested it on 3 identical machine and gave me the same error. I also tested replacing the video card (Quadro 2000) with a different NVidia card (Quadro FX...
View ArticleRe: NVidia OpenGL Driver
Ah... very good. Have you tried downgrading your video driver for the Quadro 2000? Video drivers and PTC simply don't get along. I am not sure where the core of Creo View comes from, but if it is...
View ArticleRe: NVidia OpenGL Driver
Yes, I have downloaded the most current driver off NVidia site as well as updated machine bios and still getting the same error. Other printers work just fine because most muti-function machines can...
View ArticleRe: Symbol in a table cell
Ok, try to follow this: Open up a drawing with table that has an empty cell for you logo.Right click on the table cell, and choose Properties, then in the properties window put in the symbol syntax...
View Article