Re: Haswell i7 o/c or Haswell Xeon dual
I suppose it's primarily for running Pro/E? To my knowledge, only the Assembly module can use more than one core. Last time I checked, part regeneration was all done in a single thread, so you didn't...
View ArticleRe: What is PTC's solution for the growing composites market?
Brian, FiberSim does not address many of the mass related issues that are encountered with vehicle integration of composites, such as heterogeneous merged material mass properties. FiberSim is strictly...
View ArticleRe: Simplified rep issue
I concur with your resistance to create a family table! There are quite a few downstream issues associated with them. Also, most users recommend against assembly cuts. However, there are...
View ArticleRe: Graphic Problem with Creo 1.0
Max, add graphics win32_gdi at the end of config.pro file. Martin Hanak
View ArticleTTD / TKFUNC to add a co-ordinate system?
I don't suppose anyone has such a function do they? I'm not sure how you integrate functions made with Pro/TOOLKIT into Distributed Batch (and Pro/E) but I imagine it's along the lines of "put dll in...
View ArticleRe: Cannot enter Product Code
Can your professor or college IT department help you out?
View ArticleRe: Datum Tricks/Techniques?
I'll have to try datums in the sketch. The resize is nice, wish it was quicker to get to. ;-)
View ArticleRe: pdf output incorrect
It is a hidden config.pro option, so you have to manually enter it with a value of no.
View ArticleRe: Datum Tricks/Techniques?
You can drag the internal datum out from the feature and make it stand alone so you can reuse it.
View ArticleRe: pdf output incorrect
It is a hidden config.pro option, so you have to manually enter it with a value of no.
View ArticleRe: Datum Tricks/Techniques?
I have a question about this:Ryan Gilmore wrote: Then I figured out how you can make an offset plane through a referenced point then right click and select change to offset and it will remove the...
View ArticleClik here to view.
Re: Datum Tricks/Techniques?
I'll try, wish I had a way to record. In the first image I'm creating an offset plane through a point. The second is showing the right click menu to change it from a through point offset to a distance...
View ArticleRe: Datum Tricks/Techniques?
Nice! I tried it in WF4 too and it works there as well. Works if it's through a datum point, edge or axis as well. Never knew that was there. The key was you have to RMB in the graphics area. If you...
View ArticleRe: Datum Tricks/Techniques?
Very obscure! I'm not even sure if it's documented cause I searched all over. I just happened to right click and that popped up.
View ArticleCREO wishlist
Hi, Ive been working with CREO 2.0 for a few months now, after moving from Wildfire 5. I do think its a big improvement generally (viually and speed), but there are still a lot of things that could be...
View ArticleClik here to view.
Creo 2.0 M020 and M050 not working with Windows 7 Ultimate 64 bits
Hi,I have been using Creo 2.0 M020 and suddenly it stopped working. I got the windows information "Creo 2.0 is not working and must be closed"After several trials to repair it (unisntalling the...
View ArticleRe: Creo 2.0 M020 and M050 not working with Windows 7 Ultimate 64 bits
I have the same problem with an alienware laptop with same windows on. I have tried the recovery from windows previous to an automatic update, but still not working.
View ArticleRe: Imporper Assembling encountered.
How do you go about submitting a file to PTC for this?
View Article