Creo 3.0 compatibility with Solid Edge
Hi, My company is merging with another, We use Creo, but they use Siemens Solid Edge I need to know what compatibility Creo 3 has with Solid Edge ST7. I know Creo 3 has an Import feature for Solid Edge...
View ArticleRe: Creo 3.0 compatibility with Solid Edge
We are in the same boat and would love this feedback as well.
View ArticleRe: Which 3 button mouse do you recommend?
I see... I have a space navigator but it does not double as a mouse.
View ArticleClik here to view.
How to control the rotation axis in rectangular Piping
I created an electrical ground strap using Piping in Creo Parametric 2.0 using a rectangular solid "pipe." The terminals on either end are placed in the orientation that I need them in so that the...
View ArticleRe: How to control the rotation axis in rectangular Piping
Creo 2.0 file for ref. attached.
View ArticleClik here to view.
Assmbly cut - thread still showing in removed material
An assembly cut is being made on one end of a part. That end of the part had two tapped holes. Now that the material has been removed, the threads are still showing (suspended in air). Shouldn't they...
View ArticleClik here to view.
Re: Assmbly cut - thread still showing in removed material
David Schenken does that mean I need a cosmotologist to make a cosmetic cut?
View ArticleRe: Creo 3.0 compatibility with Solid Edge
Referring to PTC technical article at https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS127522&lang=enCreo Parametric 3.0 M010 will support import of Solid Edge version 18.0 - ST5Import...
View ArticleCannot set Figure view to go back to
Hello, I have been trying to set "Figure view" by using Use Current View at the bottom when I start or going to "Figure View-->Use Current View". When I move the figure and then try to go back to...
View ArticleRegen: Generic with an Instance open
I am not sure if this is something that it occuring or not, so could someone else test it. If I have a generic part open and have one or more instance of that generic open. When I make a change to the...
View ArticleRe: Regen: Generic with an Instance open
You need to verify the instances in the family table.
View ArticleClik here to view.
Re: Inland 4-Way Plate Medium Pattern
Okay, I was able to generate the pattern I was looking for, but now for some reason there part is partially transparent down one of the sides. Can anybody tell me why?
View ArticleClik here to view.
Re: Inland 4-Way Plate Medium Pattern
Now that's new Actually, this is a long time problem with graphics. One of the settings in your feature is modifying the surface and at certain locations, it reverses the normal of the surface. If...
View ArticleRe: Regen: Generic with an Instance open
If the instance is not open, you get a regeneration error when trying to save unless you have that warning turned off or somehow bypassed. Very annoying! I would rather have a warning that gave me...
View ArticleRe: Regen: Generic with an Instance open
How do you speed up verifying that takes 30-40 minutes? Cannot always justify that for a small change.
View ArticleRe: Regen: Generic with an Instance open
Not verifying the family table can save some time, but it also can leave some problems, mostly having to do with information that is needed by Windchill. Verify steps through the process of...
View ArticleRe: Assembly cut and Family Tables
There is not two cuts. Just one cut, cutting one part. The dimension from the top plane is in the family table and the part that is being cut is just another instance of the generic part.
View ArticleClik here to view.
Clik here to view.
Clik here to view.