Clik here to view.
Re: tolerance limits addition issue
Tomas, I have been trying to get your request to work and I really don't like the limitations for family tables and repeat regions. I can have it "look" good but then I loose associatively. Once I...
View ArticleClik here to view.
Re: Dimensions not moving on first try - just me?
Text notes are worse ... to HIGHLIGHT the note you have to click exactly on one of the LINES of text between the letters is OK, between the lines is NOT, end of lines NOTonce its highllighted you...
View ArticleClik here to view.
Re: tolerance limits addition issue
Thanx for your reply. Since it is true that the table becomes too crowded I think the best solution will be as following:
View ArticleRe: tolerance limits addition issue
Not sure what version you have but with Creo 2.0, you can show just the tolerance. The dimension could show as "A" still.
View ArticleClik here to view.
Re: tolerance limits addition issue
Wow, this is like pulling teeth! Okay, this should work with every version. You can replace the dim text (@O) with the following string (it will format itself)...and add the brackets separately by...
View Article**NEED HELP** What connection to use in Mechanism **LOCK AND KEY**
I have constructed a lock and key assembly with about 20 parts and have most of it working in mechanism so that when the key is entered into the keyhole, the pins move with the key accordingly. This...
View ArticleRe: **NEED HELP** What connection to use in Mechanism **LOCK AND KEY**
Use Cam and Follower. This would ensure that as the key goes in, the pins would follow the profile of the key and would go up and down. However, if you wish to animate the spring, you may need to...
View Articlecadds 5 download
hi i need to download and install cadds5. how?? could you send to me the document please? many thx in advance
View ArticleRe: parameter_dialog_setup_file config option
Have you resolve your probleme ? Have the same ... no documentation
View ArticleProduct View question
Hi All I have a problem with ProductView Professional (I don't use ProE, I just use viewer to access models) - there is an option to email current model to someone, but when I click on this nothing...
View ArticleRe: "rolling" a sheet in Creo
Hi Brain, Thanks for taking the time out to answer my question and answer it in such detail. Very Helpful! I am using Wildfire 2 at work and 4 at home currently, so I dont know how that does effect the...
View ArticleClik here to view.
CreoView License settings in startup window locked
For one of my users, the license settings are locked and he is unable to change them. I have not seen that for any other users....why is his locked and how do I change it so that he can update his...
View ArticleClik here to view.
AUTOMATICALLY OPEN PRO-E AND RUN MAP KEY
I HAVE 4 PRO-E LICENCE. (CREO-element/ PRO-5)now 1) I WANT TO OPEN ONE OF THE PRO-E FROM ABOVE2) AFTER THAT I WANT TO RUN my MAP KEY ( For e.g. Map key name - XYZ )AUTOMATICALLY......... (with the help...
View ArticleRe: 3D input device driver programming
I found StickWorks for Saladworks, but it seems it isn't available or current any longer. Does anyone know otherwise? Or ideally, if there is something similar for Creo?
View ArticleRe: Pierce constraint in Pro/E and Creo?
i never knew you could do that,moving sketch on new plane from sketch setup.i would have taken edit references route.
View ArticleRe: AUTOMATICALLY OPEN PRO-E AND RUN MAP KEY
Hello Alok, if you look into PROEWF5\bin directory, you will see proe.exe file. When you launch this file, the startup window opens (shown in your original post). If you look into PROEWF5\bin directory...
View ArticleRe: AUTOMATICALLY OPEN PRO-E AND RUN MAP KEY
Thanks a lot Martin, And regarding MAPKEY, yes in EMPTY session i want to run my MAPKEY.Let's say its name is XYZ.
View ArticleRe: AUTOMATICALLY OPEN PRO-E AND RUN MAP KEY
Hello Alok, to run MAPKEY in EMPTY session, you can do following: 1.] launch ProE and run MAPKEY2.] finish ProE session3.] find trail file created by ProE session4.] rename trail file (eg. to...
View ArticlePossible to add radius to sheet metal bend note?
Hi, quick question from sheet metal newbie: Is it possible to add the bend radius to the sheet metal bend note, if so how? And is it possible to automate the process? regards, audun
View Article
