Re: What's new in Creo Parametric 3.0?
Information from Sale, it delays four weeks to 18-July for Creo Parametric download. Very disappointed for PTC, product release date always delay and delay again.
View ArticleRe: How is this made?
Thanks Matt, though since that's on the page ... I was refering to the ability to spin, scroll, and zoom through the 3D scene in a browser. Also, one of the modes shows live reflection calcs on the...
View ArticleRe: How is this made?
OK Found it - it's buried in a dropdown. One that says View on Sketchfab. ****Publish & embed interactive 3D models Instant in-browser viewer No plugin required 27+ supported formats...
View ArticleClik here to view.
Re: Spring - Wrap Command
You can create the bottom the same as the top to get it flat. Just have a horizontal section in the sketch with a radius (fillet) where the slope begins. This is the option to change the orientation...
View ArticleRe: Setting up modelCHECK conditions
I looked into this further. SPR 1194232 led to an update in Creo Parametric's Help Center. A part created in the piping module is not recognized as a "PIPE" part type in the same way as Sheetmetal,...
View ArticleRe: no decimals option in drawing notes please
I think the easiest way to do this would be to round the parameter in the model, then call it out in the drawing the same way you are now. To round a parameter in the model just go to the relations...
View ArticleRe: Setting up modelCHECK conditions
That helped. Unfortunately we use the Piping module to create all of out pipes. So if modelCHECK picks up on pipe feature how can I configure modelCHECK to recognize pipes that were made within the...
View ArticleRe: Creo - SharePoint 2010 - IE11
Hi Jiri, What are the exact steps you are making when this error message is given?Do you have Creo Parametric 1.0 or 2.0?What datecode of Creo Parametric are you using? (File > Help > About Creo...
View ArticleRe: Basic Dim with GD&T
Is there something to change in the config.pro or drawing.dtl file to set this?
View ArticleRe: Can rows in Family Table be re-ordered
Dennis, For row swaps, it is a GIANT pain, but I think I just found a way around this. You should be able to remane and sort by the instance name. In front of your instance type "a1"-"a-9", then...
View ArticleRe: "works to product specification" - who writes these things???
Hi Tom, Thank you for bringing this to our attention. I've pulled this article from the public domain and submitted it for rework by an engineer in that product area. In the future, the "Did this...
View ArticleRe: Basic Dim with GD&T
I think this was one of the few that didn't make it to the detail.dtl config options. You can change the default text style in the session but I am not sure if it saves it outside the current drawing,...
View Articleflexible modeling tab does not appear
I cant find flexible modeling tab in the ribbon. Please note that I have checked this option during customizing the ribbon. Also FMX is available in my license file. Can anybody help me out here?
View ArticleRe: Default modelisation planes
Hi Mahesh, I think I dont understand how to fix this. I just don't find that win32_gdi. Can I set this from the Options/Configuration/ and then what do I do ?
View ArticleRe: Default modelisation planes
Ok 1. Browse to <Creo 2.0 Install location>\Common Files\M110\text (Default is C:\Program Files\PTC\Creo 2.0\Common Files\M110\text)2. Open config.pro in notepad3. Add graphics win32_gdi >...
View ArticleRe: FAMILY TABLE MAGIC
As I mentioned it is not an easy process. 1. I find that I can make copies of drawings and cad files from the folders themselves. I usually name the copies with something like "ZZZZZ" as the front...
View ArticleClik here to view.
Re: Default modelisation planes
Thanks for your explain, I did it, as you can see on the screenshot below, but it still does not fix my problem and I dont know why.
View ArticleClik here to view.
Re: Default modelisation planes
Which graphics card do you have on machine?----- Rename config.sup (if any) in <Creo 2.0 Install location>\Common Files\M110\text > launch Creo and check the datums. If still fails, move to...
View ArticleRe: Default modelisation planes
It works now!! Thank you so much Mahesh for this step-by-step answer. I really apreciate
View Article