Re: How to disable red line during spin?
I seriously doubt it. The quick right click is used for cycling through selections and the long right click is for pulling up the menu.
View ArticleRe: Very painful switching from SolidWorks to Pro/E
Here's a good article from an engineer who has to work with both products: https://www.google.com/#q=advantages+of+creo+over+solidworks
View ArticleRe: Creo vs. Solidworks vs. Inventor
we do a lot of work on Pro/e and are involved with big customers doing lot of stuff very efficiently with Pro/e...we are also not very happy with the way Creo has come up..but it is mainly due to the...
View ArticleRe: Creo vs. Solidworks vs. Inventor
Creo is really powerfull software. No question about it. But, it looks like unfinished software to me. Trying to find a way to avoid some of the bugs or even to find a fix around it hurts my...
View ArticleRe: Very painful switching from SolidWorks to Pro/E
Rohit Rajan wrote: 2. in proe wf5 press Ctrl and select the parts you want to isolate then RMB and select Representation and select "Master"..it will isolate your parts exactly as in solidworks.if you...
View ArticleRe: Very painful switching from SolidWorks to Pro/E
No particular article shows up - is there a more focused search? I get a lot of "Why SW is better than Creo."
View Articlehow to set a mapkey hidden/show all layers
it really made me headacke. creo2.0 can't not set a key to off/on all layers, but off/on one specified layer is OK. anybody could help me? I appreciate U very Much!!!
View ArticleRe: Very painful switching from SolidWorks to Pro/E
solidworks 2014 just added a replace entity option for sketcher..since ages it has been there in pro/ethey added a model viewer in solidworks 2012 again it was there long back in pro/e when solidworks...
View ArticleRe: how to set a mapkey hidden/show all layers
Hi, I solve it . it is a conflict problem with mapkey. I set it as "HD", but I have a "H" for other already.. do u understand ?
View ArticleRe: Creating 100 different 3d-printer-models with a single click
That is certainly doable. I think it would be easier using VBA over AutoIT or Autohotkey (as similar program I use). I have tried to automate Creo using Autohotkey and can't connect to the session yet....
View ArticleRe: Creating 100 different 3d-printer-models with a single click
You could also create an excel or mathcad analysis that could maybe be referenced in a family table? But your talking about Creo! I guarantee if you don't already know the answer to your question it is...
View Articleindividual pipe color change
Hii have a problem with piping in Creo 2.0. the problem is that I can't change the color of individual pipe.can please anyone help me, because i have applyed on the audax competition and I'd really...
View ArticleFormat (.frm) not saving
Whenever I create a Drawing in Creo 2.0, I use a company format to write information about the part I just created.Before, when I had Creo 1.0, whenever I would save my drawing, Creo would save also...
View ArticleRe: Creating 100 different 3d-printer-models with a single click
Here is a simple family table part. It only take 5 minutes to create the family table.As for exporting the instances as separate stl files Pro/Batch or Distributed Batch, depending on what version of...
View ArticleRe: Format (.frm) not saving
Check your config.pro file for the following option PRO_FORMAT_DIR It should point to the directory where the format files are stored. This way you don't need to save the format file in the working...
View ArticleRe: Format (.frm) not saving
I believe this is standard practice for Proe & Creo, saving the drawing does not save the format. However, if you do a file > backup it saves everything needed for the drawing (drawing,...
View ArticleRe: individual pipe color change
spec driven piping or non spec driven piping? If the pipes are in different assembly, you can change the color by selecting the respective assembly.
View ArticleRe: Format (.frm) not saving
save your file to following folder Creo 2.0\Common Files\M100\formats.
View ArticleRe: Need Help ! ! - Assembly License setup issue
Don, if you want to change a license attached to your launch command, run reconfigure.exefrom Creo2\Parametric\bin directory and click Configure button. See attached pictures. Martin Hanak
View ArticleRe: Detailed BOM generation in Creo?
Waseem, I think the only chance how to get your specific BOM quickly and easily is to create user application with requested functionality. You can try to find a company, which is able to make such...
View Article