Re: Tips for text
Isn't this what tab-stops and word-wrap were invented for? I know tab-stops were available on a Smith-Corona typewriter that was built in the 1960s, so it's not like PTC hasn't had time to catch up....
View ArticleRe: How to split this IGES "assembly" that imports as single part
I imported as an assembly and it is still one piece, so it looks like they exported it that way. So the only why I know of it to make copies and delete out all the surfaces except for the piece you...
View ArticleRe: changing tapped hole specifications
Bill, your examples are very helpful. I have another question: Is there any way to suppress the automatic space after the parameter? I.e, the "&PATTERN_NO X" gives me a "3 X " in the note...
View ArticleRe: changing tapped hole specifications
This has been a long time discussion about PTC not using their "best effort" in making these tables. I have a similar issue with UNC - 2 B... which should be UNC-2B. If you bracket the characters with...
View ArticleRe: changing tapped hole specifications
Thank you Antonius. This is very good! edit - snippy comment removed -
View ArticleClik here to view.
What is the best way to specify a countersink on a hole through a shaft?
I need to specify a countersink on a hole that passes through a cylindrical shaft. When fully created, the resultant shape of the outer perimeter of the countersink is an oval due to the interface...
View ArticleRe: How to split this IGES "assembly" that imports as single part
I know that some companies only provide single level iges files to protect reverse engineering. Funny thing is that they rarely take the time to make it an envelope model.
View ArticleClik here to view.
Re: What is the best way to specify a countersink on a hole through a shaft?
Typically this is defined in a section view along the long axis of the oval. there you specify the diameter and the angle.
View ArticleRe: What is the best way to specify a countersink on a hole through a shaft?
Section the hole either the long or short way on the csink and dimension the width there -or- My favorite method, one that is not used enough, is to dimension to the theoretical sharp of the cone of...
View ArticlePagination of hole table on drawing
What are the steps required to paginate a hole table on a drawing?
View ArticleRe: Printing to pdf file
Please post this message in "Creo" community, here: http://communities.ptc.com/community/post!input.jspa?containerType=14&container=2023
View ArticleRe: Can we compile a list of config settings that influence the performance...
Sure thing, thank you
View ArticleRe: how to integrate the material cost + operation cost to get total cost
I have not got time to make the video or tutorial, could you please share the files so that i can try for the solution.
View ArticleRe: display search path in wildfire 3.0
Hello to all, I have created version of the script for Creo Parametric 2.0 for Joe Grant. Martin Hanak
View ArticleRe: What is the best way to specify a countersink on a hole through a shaft?
Thanks Tom and David, I was considering one of these methods but wasn't aware that drafting standards provided unique instruction for this situation so thought I'd ask.
View ArticleRe: Printing to pdf file
Good reccomendation Vladimir, I've moved this discussion into the Creo community.
View ArticleRe: Printing to pdf file
Your print manager probably thinks there are keep out margins on your printer. Typically, if you print to exact scales, you should get what you want.I am assuming here that the drawing border goes...
View Article